Nitrogen Enhanced Purging System 1000 Pumped

Nitrogen purging system 1000 pumped is a fully self-contained, portable nitrogen purging system designed for maximum dry gas purging. The nitrogen gas desiccation unit is filled with a moisture-adsorbing agent, molecular sieves, and a self-contained pump, eliminating the need for an additional gas supply.

Portable and Efficient Gas Purging

The nitrogen gas venting system can be programmed to display dewpoint measurements in Celsius and Fahrenheit with pressure options in Kpa or psi. The gas purging unit also allows verification of sealing standards for the equipment to be purged, with pressure testing capabilities ranging from 10.3 Kpa (1.5 psi) to 34.4 Kpa (5.0 psi).

The system’s dewpoint monitor provides users with gas dryness information before purging. Equipped with a dewpoint stat, it enables users to determine equipment moisture content and implement optimized gas and purging procedures for product control. The nitrogen flush system can automatically switch off and isolate dry gas when the selected dewpoint is reached.

Dewpoint Monitoring and Gas Control

A data logger can also be installed to monitor dewpoint degradation time, allowing users to calculate the water vapour transmission rate and determine the required water removal rate during the initial purging phase. This system can be used in various applications, including surveillance instruments, image intensifiers, thermal imaging, underwater equipment, optical instruments, and electrical housings.

  • Fully self-contained and portable design
  • Maximum dry gas purging efficiency
  • Dewpoint measurement in Celsius and Fahrenheit
  • Pressure options in Kpa or psi
  • Sealing standards verification and pressure testing
  • Dewpoint stat for optimized gas procedures
  • Automatic shut-off when the desired dewpoint is reached
  • Built-in data logger for monitoring and calculations
  • Versatile applications in various industries
  • Selectable Pressure Range: 10.3kpa/17.2kpa/34.4kpa
  • Display Range Pressure: 0 to 34.4kpa
  • Display Range Dewpoint: +20 to -80 degree/ +68F to -94F dewpoint/0.1 degrees
  • Resolution: 0.1 degrees dewpoint
  • Accuracy: +/- 2 degrees dewpoint
  • Data Output Pressure: 0-5 volts
  • Data Output Dewpoint: 0-5 volts
  • Power: 100-230 volt 50Hz – 60Hz
  • Power Consumption: 3 Amps
  • Dimensions (W x D x H) : 490 x 425 x 190 (closed)
  • Weight: 15kg
  • Ingree Protection: 1P54 (closed case)
  • Operating Temperature: -10ºC to 50ºC
  • Storage Temperature: -50ºC to 65ºC
  • Proof Pressure Input: 137kpa (20 psi)
  • Flow Rate: 20 litres/min

Nitrogen Enhanced Purging System 1000 Pumped Product Brochure: Download