Condensation Terminator Sheet


The Condensation Terminator Sheet is used to keep cargos protected from moisture during transportation.
Shipping Container Condensation

As the walls of the containers are made of metallic materials, they are great insulators of temperature, which results in the temperature to be influenced by the environment easily. As temperature changes frequently occur, when the walls of the container become cooler than the air, condensation takes place.

During condensation, water vapour turns into a liquid, rising and adheres to the surface of the walls and roof of the container. As the water droplets accumulate and become denser, they eventually drip off these surfaces and onto the cargo/ goods.

This results in damage occurring to goods such as corrosion, caking of powder, packaging deterioration, moulding and more. Further damage to goods may also happen, resulting in more losses occurring.

Condensation Terminator Sheet

Condensation Terminator Sheet is designed to allow only water vapour to pass through and act as a barrier to water droplets. It functions as a water-absorbing sheet to catch condensation droplets from the ceiling and walls of the container. It is made to ensure it is durable and firm to prevent sagging and water from leaking even if a large amount of water is absorbed.

How to use

CT Sheet is designed with a special hook. These hooks are to be hanged onto lashing rings and tied to lashing bars at each corner using ropes.

The most inner side and door-side of the CT Sheet should be attached to the ceiling with adhesive tapes.

Things to note:

  • There should be a 20cm gap between the CT Sheet and the top of the cargo.
  • The cargo should not be touching the CT Sheet.
  • Ensure that there is no oil or dirt on the surface of cargo and CT Sheet.
  • Ensure tape areas of the container is dry so that CT Sheet remains intact.
  • Lashing rings is needed for CT Sheet to be attached to roof corners.

To summarise, Condensation Sheet is an easy to use and cost-effective solution to prevent moisture damage in containers, with only 5 minutes needed for installation and removal. CT Sheet does not need to be cleaned after each use and can be easily stored. Most importantly, it is highly applicable for many different products from steel to steel wires, machine parts, beauty products, chemicals, food and many more.

Key Features


  • Metal
  • Machines
  • Medicine
  • Detergent
  • Cosmetics
  • Food

Product Features

  • Prevents moisture damage
  • No obvious sagging
  • Simple installation
  • Separable into burnable and non-combustible
  • No need to clean up
  • Versatile, Applicable for wide variety of goods

CT Sheet Brochure